**All Capacities and Time Frames are Approximations** Place the other end of the hose in the pool, completely submerged. Attach one end of the hose to the faucet. You cannot use sand and/or uncompacted soil to provide a level surface for this pool; it will only wash out.The 20ft (6m) distance is measured via the shortest straight line distance the supply cord would follow without piercing a floor, wall, ceiling, doorway, window, or other permanent barrier.On some larger pools, you will need to place the strap ring that comes in the box on top of the pool frame and slide it all the way down to the leg caps. Below is just one suggested option of deflating your Polygroup Quickset Pool.Utilize the clamp to keep the valve open while freeing up both hands to squeeze air out of the inflatable ring. **All Capacities and Time Frames are Approximations** Push the drain plug into the... 3. Angle them towards each other and guide the beam into the fitting as you lower them both down together. How to Drain a Pool With a Garden Hose. When you reach the last connection, install the last T-Fitting on the end of one of the beams. Remove any remaining water. You cannot use sand and/or uncompacted soil to provide a level surface for this pool; it will only wash out.The 20ft (6m) distance is measured via the shortest straight line distance the supply cord would follow without piercing a floor, wall, ceiling, doorway, window, or other permanent barrier.There is no industry standard for deflating inflatable ring pools.
1.
Make sure the ground is free from sharp objects that may puncture the pool.
Strap ring shown below highlighted in yellow.
Remove any remaining water.
The pool must be assembled on a smooth and level site of firm soil that is free of stones, gravel, sticks, blacktop, or other oil base compounds.Do not install pool on a wooden deck or any type of wooden surface.
Turn on the faucet to allow a full stream of water -- rather than a trickle -- to travel through the hose.
Step 1. The pool must be assembled on a smooth and level site of firm soil that is free of stones, gravel, sticks, blacktop, or other oil base compounds.Do not install pool on a wooden deck or any type of wooden surface. Push the drain plug into the... 3. Wash and completely dry pool using a soft cotton cloth. Locate the drain plug on the outside pool wall and remove the drain cap.
1. Oscar R Step 2. Oscar R Locate a flat, level area to setup the pool. Wash and completely dry pool using a soft cotton cloth. This process is time consuming but does offer a good way of safely removing the air. Once the ring is empty, remove the clamp. Lift up on both of the last two beams in order to get them to insert into the T-Fitting.
A standard garden hose will thread onto the... 2. How to Drain the Water from Your Above Ground Pool - YouTube A standard garden hose will thread onto the... 2.
Locate the drain plug on the outside pool wall and remove the drain cap.