mudpack wrote:While I have seen, and used, painted canvas-covered kayaks, it is no substitute for fiberglass and resin. There are a few tricks that make later work easier… First, fiberglass doesn’t like abrupt sharp angles — it … Next is that same piece of canvas anchored behind the rigid foam. Canvas, tacks, filler, etc. After I did my own boat, I sealed a few other boat topsides using the Gluvit method. So heavy in fact that when using a sanding primer you want to sand off most of it anyway. At every junction, run a bead of hot-melt glue, on both sides if necessary. I came across the idea of "poor man's fiberglass" on some diy camper sites. If you are using fiberglass and finishing resin there is no need to go any finer than 120. I’m using a technique called “poor man’s fiberglass” which involves canvas or bed sheets and paint or glue.
Years ago I lived aboard a very old cabin cruiser in the San Francisco Municipal Harbor. This was an enjoyable build and hope this helps open eyes to the idea that composites are not all exotic high end materials. I'm working to make my own mouse boat. Thanks for the link! 2 years ago I started a new phase in the camper this morning. on Nice job. front tongue box storage unit; huge rear hatch hiding large kitchen with backsplash I tackled what I think is the hardest section first, the tapered front end. ;-)Interesting build. The burlap absorbs much better than canvas (which is also used for sealing wooden decks). Part of the appeal of trying it is the "poor man" aspect. If anyone is interested in a teardrop for sale maybe they might be inspired to find out how to build a teardrop camper.
Because pigments are especially heavy. Thanks for the support! Skinning.
At their root a composite is simply meshing of different materials that their sum is stronger than their pieces. I'm planning on having my teardrop camper plans available once I finish drawing them.
I’m having a terrible time trying to make the final decision whether to use PMF (poor man’s fiberglass = TB2 glue, canvas and latex paint), or to step up and use epoxy and fiberglass, to cover The Poet Creek Express.
Someday... 4 years ago It never leaked again. 4 years ago IMHO, fiberglass is the kiss of death for an old canoe. Man, but you opened a can-o-worms! 4 years ago 11 comments.
… https://www.instructables.com/id/Poor-Mans-Fiberglass-make-nearly-anything-weatherp/ In the pictures you … Continue reading "3/2/2019 Poor Man’s Fiberglass" I started a new phase in the camper this morning. Epoxy and fiberglass is expensive.
save hide report. I chose canvas and paint, specifically Glidden Gripper. If the finish will be sealer then primer and paint then 220 to 240 is good. After spending some time with the cooler in question, I wanted to move forward with a false bottom compartment. Personally, the LAST thing I'd do is fiberglass a canoe. Most of the same finishing work as epoxy/glass if you want a smooth finish. More fun with Poor Man’s Fiberglass. Skinning. After completing the Cap; the basket (kinda looks like sponge bob's underwear by now) is the same repeat of the steps.
Coat your standard blue or pink foam board (2 or 3 in thick) with a layer or 2 of canvas soaked through with wood glue. Any particular reason I wouldn't use poor man's fiberglass on a canoe or kayak, particularly when money is an issue? Some of the unique features include: poor man’s fiberglass outside skin of canvas with paint (kind of like the old cloth covered aircraft of World War II); crank-out front window with rock guard (thermally insulated of course!)
Don’t let the glue glob up — it’s a pain to work lumps down to a smooth curve that won’t bubble the fiberglass. Why a clear sealer? Reply (03-02-2016, 02:43 PM) AndrewB Wrote: Poor man's fiberglass is using canvas (drop cloth from lowes or fabric store or bed sheets, etc) + wood glue. A few things I learned quickly on this project. The burlap made the decks non-skid. 4 years ago I picked up a $10 paper coverall from HD before I started which should last me for a while. As a handicapped person terrified of falling or slipping--how I got this way in the FIRST place!--I am always looking for NON SKID ideas. Choosing materials and building methods is a balancing act between benefits and cost and necessity. She leaked top and bottom. my home built Teardrop trailer Unlike most builders who spend months of or years at building their TD, I needed a place to stay overnight at work, NOW. "I'm back in the game" (my sad Dave Chappel reference) There are a few things I wanted to hit on in this build. Only advantages I can think of for fiberglass/epoxy is that you can have a clear finish if you have some nice wood you want to show off, and maybe fiberglass/epoxy is more durable. Simple flat pieces or simple rectangle shapes are fairly easy to cover in this method. Why are you not interested in canvas?
About: I work in industrial automation and spend any free time making.